MoDTC 40ml Syringe Paket(about1.4floz)
[Effect]:Increased response, antifriction effect, anti-wear, anti-oxidation
[Application]:Engine gear oil additive
Mo=9.5~10.5% (95000~105000ppm)
Additive amount 0.05~0.5%.
For approximately 8~40 liters of oil
For 1 liter of lubricating oil
Engine protection: 2ml
Differential, manual transmission: 5ml
Breaking-in, circuit driving, etc.: 10ml
Adjust within the range of 0.1 to 1% by weight depending on usage conditions, etc.
It is recommended to put the oil in a 20L can in advance and stir it before storing it for use to prevent oxidation of excess oil.
This additive is blended in fuel-efficient oils and high-performance oils to reduce friction loss and improve fuel efficiency and response.
It is a type of organic molybdenum that is often blended in engine oil additives.
[Features]
This oil is composed of 100% organic molybdenum compounds with a molybdenum content of 9.5-10.5%.
The heat and friction generated on sliding surfaces causes a film of sulfur, molybdenum, and their compounds to form on the sliding surfaces, preventing wear and oxidation.
The molybdenum film reduces friction loss due to low friction, so improved fuel economy and engine response can be expected.
[Applications]
Addition to engine oil and gear oil
Prevention of wear, friction reduction, and oxidation of lubricating oil in 4-stroke gasoline and diesel engines, manual transfer transmissions, and differentials
Improvement of initial blending after new vehicles, overhauls, and repairs; protection of engines, transmissions, and differentials
Not recommended for addition to wet clutches, multi-disc clutches mechanical LSD AT transmissions, CVTs, other hydraulic fluids, etc.
*For shipping outside Japan, the syringe will not be filled with the additive for safety reasons, and the contents will be packed separately.
40ml aluminum pouch + syringe set.